NAVITEK is designed for cable installers and IT administers working in the structured data network environment. With its active testing capability, NAVITEK is the perfect tool to support network administration functions such as moves-and-adds. It enables users to troubleshoot both passive and active networks.
. Comprehensive testing and troubleshooting tool for structured data networks
. Verifies the integrity of the physical network and validates active network connectivity with PING and Hub blinking
. Detects port services such as Ethernet, ISDN, POTS, Token Ring
. Announces Ethernet network speed and capabilities
. Performs length measurement up to 1500 feet
. Tests UTP/STP cable to T568A/B wiremap and fault identification
. Supports four-tone generation for cable tracing
. Easy-to-read backlit LCD display
Specifications
Physical Dimensions Size: 15 ×7.4 × 3.2 cm (5.9 × 2.9 × 1.25 inches) Weight: 200 grams (7 oz.) With battery Operating temperature: 0 to 50 C (32 to 122 F) Storage temperature: -30 to 80 C (-20 to 176 F) Humidity: 10%to 90%, non-condensing
Battery Life
(9V Alkaline battery, typical) times are for the full capacity
of the battery used continuously in one of the following modes:
Standby: 2.5 years
Cable Testing: 50 hours, no backlight 27 hours, 50%backlight
Network Testing: 15 hours, no backlight 14 hours, 50%backlight
Cable Types
Shielded or unshielded, CAT6, CAT5E, CAT5, CAT4, CAT3 and coax
Minimum cable length for testing split pairs - 1 meter (3 feet)
Maximum cable length for single-ended cable test - 1.25 meter (4 feet)
Length measurement range - (CAT5/6) 0 to 457 meters (0 to 1500 feet)
Part No: 33-845 (One Remote)
Part No: 33-846 (Eight Remotes)
Print this page 
Email this page